The inlet cap is attached to the rear of yournail guns handle. It both seals the control to include the airinside and is the attachment factor for the speedy-connect nipple. Probably the most original trouble with the inlet capis an air leak. This is in general brought about through a crack within the cap,customarily precipitated by way of accidentally losing the gun. The magazine additionally attaches to the cap. If dropped, the mounting bracket can be brokenoff. Changing the inlet cap is a repair that youcan do your self and i’m going to exhibit you ways. Hello, Mark Sodja. Home made repairs like these are easierthan you would believe. From lawn machines to cordless drills, kitchenmixers, outside drills, our how-to movies will stroll you through each restore from startto finish. Doing it your self manner never having to doit by myself. Let’s get began.I will begin via casting off the inlet cap. It’s secured with three screws. [background noise]Mark: there is also one screw that secures the magazine to the bracket on the inlet andI’ll get rid of it. I will get rid of the gasket from the cap. I’m going to eliminate the inlet filter. I will dispose of the inlet nipple from the oldcap and transfer it over to the brand new. I will follow some thread tape to the nipplebefore I set up it on the brand new cap.[background noise]Mark: i’ll reinstall the filter and now the cap is ready for re-installation. I will line the intake gasket with the coverand then align this meeting with the gun. I will secure it with the screws. I have to take into account to reinstall the hook onone part of the cap. I’m going to reinstall the screw that secures themagazine to the cap. That is how easy it’s to install a new inletcap for your nail gun. Be sure to investigate back regularly for brand spanking new videosand informed advice. If you happen to observed this video valuable, give us athumbs up and leave a remark.