Hello everybody. It’s Jeff of house restore Tutor, and todayI’m going to be sharing with you learn how to scan your water pressure in your condo and howto regulate the water stress at your water major in case you have a water strain regulator. So my neighbor is showing you here in thisvideo that he’s trying out his water in the laundry tub utilising this water gauge, and it suggests youthat his water pressure is roughly 70 psi. So what Pat desires to do is decrease that byadjusting the screw on his water strain regulator. So you will see here he’s turning the wateroff at his water predominant. And subsequent, what he’ll do is adjusta screw on his water strain regulator that used to be established by way of a certified plumber. So this is the water stress regulator. And as you can find, it has a lock nut on thebottom, and there is a screw that is sticking up out of that lock nut. For those who regulate the screw to the correct, it increaseswater stress.For those who modify the screw to the left, it reduceswater strain. So the very first thing that Pat needed to do wasscrew the nut to the left, okay? And what that did is cut back his water pressureheonly became it via one quarter turnand then you definately have to lock down the locking nut to makesure that that screw, that adjusting screw, does now not transfer. So the following thing that we did was once experiment thewater strain once more using our water stress gauge. And as you’ll find right here from this video, it’sgoing to discontinue at roughly 60 psi, which is strictly what Pat desired to achieve.So i am hoping this video showed you methods to: (1)scan your water stress; and (2) modify it on the water pressure regulator. So i’m hoping that helped out. And if in case you have any questions, talk over with me atHomeRepairTutor.Com. Take care..